Parkside x12V Performance drill hook
Description
PDFA hook, created for the small Parkside Performance x12V drills. It replaces the “Brushless” badge on the back of the tool and enables easier carrying especially for people that are used to tools with hooks. The model consists of two parts, easily printed in PETG. The hook can be used by both righthand and lefthand users.
Additional hardware required:
M3x50 screws 2pcs
M3 nuts with nylon inserts(optional, but recommended) 2pcs
The hook is tested with Parkside PBSPA 12 B2. I am confident it will work with all PBSPA 12 models.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
After testing, I decided to shorten the elongation on ParksideLeft, as it wasn't doing anything useful except blocking the motor vent. ParksideHook was elongated nearly double the original size as the original was short for my liking and the tool fell down a couple of times. Shortened the length of the screw shaft on ParksideRight and extended ParksideLeft so the seam of the two parts when assembled aligns with the seam of the tool. Purely aesthetic. Finally, combined ParksideHook and ParksideLeft into one part.