The stock runout sensor that uses a spring and some bearings got too much resistance, and limited my extruding capability! so I made this optical version, that's smoother, lined to the teeth with ptfe tubing
Very “clear” shortcoming includes: not able to detect clear (pun intended) filaments in it's path
🤩 Do you like the design? You can help fund innovations like this!
Consider supporting me!
Much appreciation given to my supporters, and you get exclusive access to various CAD files!
Submit feature requests here!
Features:
- 4 Different variants for wide variety of couplers
- 2 LED output paths to be able to see the indicator, everywhere!
- Lined with ptfe for as smooth of a filament path as possible
- Uses a widely available optical endstop sensor
NOTE:
- Not able to detect clear filaments
- For neptune users, you have to cross the 2 outer wires for it to work
- For other users, the pinout is written on the pcb, wire after it
Recommended print settings:
- Nozzle diameter: 0.4mm
- Layer height: ≤ 0.2mm
- Reverse on odd: disabled
- Precise walls: enabled
- Wall order: i/o/i
- Tolerance requirement: 0.1mm
- Print orientation: as imported
- Supports: included with the model, enable support generation and change to manual placement, don't add anything
Recommended materials:
- PETG
- ABS/ASA
Installation requires:
- 2 * PC4-M10/ECAS04
- 2-3 * M3-14mm/16mm (Watch installation guide)
- 3* M3 (Maximum 4mm long) heatset inserts
- 4mm OD PTFE tubing
- Lerdge optical endstop
Installation guide:
- ECAS04
- PC4-M10
- UBBI/UBBI-ECAS04
Changelog:
Official release | Changes |
---|---|
v27 20th August 2024 | First official release |
The author remixed this model.
Optical runout sensor that's compatible with UBBI!