WinderTenna Mod of K6ARK Wire Winder

This is something I've been working on, and have used, for quite some time. I wanted to create a whole-enchilada approach to a QRP EFHW antenna that allows me to not have to take anything apart. With this design all that is needed is to unwrap the wire and plug in coax. 

Two models are available, one with 2 mil holes that are sized for 28 AWG wire and the other with 3 mil holes that are sized for 24 AWG wire. It's possible that larger sized wire will fit through the respective holes, but these are the sizes that I have seen work. Drop a comment for the sizes you've used for more data points.

I have employed this by using the velcro wrap that holds the wire to attach the 49:1 to bushes, trees, signs, etc.

Greatly appreciate you all looking at my modified design, thank you.

The following descriptions are the components that I used. Others may work, this is what I have used. 

Print Settings:

Filament - PETG

Fill - 25%

Top Layers - 3

Bottom Layers - 3

Printer - Ender 3

Purchased from Amazon:

BNC Bulkhead - BNC Chassis Panel Mount Socket Female Jack Solder Type Connectors Adapter 6-Pack

28/24 Gauge Wire - BNTECHGO Silicone wire

Magnet Wire - BNTECHGO 28 AWG Magnet Wire

EBay:

FT50-43 Ferrite Core - .5" dia, .2" thick. Item no longer available, purchased Apr of 2023

Digikey Capacitor Part Numbers:

100 pf cap - 1451PH-ND

120 pf cap - 445-173346-1-ND

150 pf cap - 445-180619-1-ND

I'll talk a little more about it in a YouTube video that will be released 19 Aug. Once live, I'll post a link here.

My modification of Adams design was to implement a series of through holes to facilitate BNC bulk heads, toroid mounting locations, as well as strain relief for the magnet wire and antenna wire. The overall dimensions and shape remain unchanged.