Raspberry Pi 2 model B Mount for Prusa Mini/Mini+

BOM (Bill of Materials)

You need self-tapping M2x8 screws. They look like this

You also need a Raspberry Pi 2 type B. ;)

Printing Settings

Printing this model can be a bit tricky. Feel free to use the included 3mf file in Prusa Slicer. (The supports only work in Prusa Slicer).

I used the 0.2mm QUALITY preset. I tried to use as little support as possible. You can put supports everywhere if you're okay with longer printing times and some post processing.

Warning!

You must remove the SD card before pushing the Raspberry Pi into place. You don't want to snap the card. I've been there, It wasn't fun.

With that out of the way, Happy Printing!