LTT Screwdriver Case (multi-material and multi-colour)

This is case for the LTT Screwdriver with print-in-place multi-material hinges.

The tolerance of the hinge is designed for PLA-PETG interface. It will not work with a single material print, as the hinge part will get stuck together. For single material print, please refer back to the original model, by Andy-g6zyd.

Print guide:

• Print orientation: 
  • As giving in the ".step" files
• Resolution: 
  • 0.2 mm
• Infill: 
  • 20%
• Walls:
  • 3 or 4
• Filament:  
  • PETG is recommended for everything except the spacers
  • PLA spacers and supports (see the included pictures)
• Brim: 
  • No
• Pause: At 7 mm, to insert 12 off 6x3mm magnets

Notes:

• Some spray-on lubricant would help the hinge move smoothly.

Donate to my coffee fund: 

• Ko-fi
• PayPal
• BuyMeCoffee

Showcase:

Replace the snap latches with print-in-place multi-material hinges

Add compatibility with standard bits

Add embedded magnets