Eggfinder TX 54mm nose mount

A sled to mount an Eggfinder Tx in a 54mm Nose cone coupler/shoulder with a screw thread.

Also included the female threaded housing to be epoxied into the 54mm coupler.

Thread is M45 x 4.5

2 x M2.5 3 or 4mm long brass heat set inserts used to secure sled

Battery pouch is designed for Turnigy nano-tech 460mAh Lipo battery

Aerial cutout is designed for an external Lynx 1/4 wave whip antenna on an rp-sma mount as per Cris' suggestion. Strain relief cutout for zip tie

Cutout in base for M6 threaded eye nut and M6 locknut

Print Settings

Printer Brand:

MK3

Printer: 

Prusa i3

**Rafts:** No

Supports: 

No

**Resolution:** 0.2mm

Infill: 

30

Category: Models