Old laptop but still valuable for office or programming. It suffers since the beginning from overheating due to a poor design of the cooling system.
But actually, it can be improved greatly by raising the fan height.
Indeed, 25-30% of the fan duct is blowing on the edge and under the motherboard. Design flaw !
With the parts in this design, you will raise the fan by 5mm so that almost 100% of the fan duct will blow on the cpu and heatsink.
Results: in my case I've reduced by 15-20°C the temperature of the cpu.
In addition, I encourrage you to change the thermal paste and clean the fan and heatsink.
To print the part, I recommend using TPU.
You will also need 2x M2.5x8 screws.
The author marked this model as their own original creation.