This is a all-in-one cartridge organizer for Nintendo handheld concoles, including Gameboy, Gameboy Advance, DS, 3DS, and Switch.
This Organizer is modular and stackable, meaning you can arrange any combination of cartridge types you want to put in the same plate, and pile up the plates. One Plate can hold 4 rows of Inserts, with the GB cartridige occupying 2 rows and the rest types occupying 1 row.
You will need:
• TPU filament for the Insert
• Another regid filament for the Plate
• 8x3 magnets. I bought mine here
Printing and Assembly:
• Plate.stl can hold all 4 types of Insert. Plate_thin.stl only holds DS/3DS and Switch Insert to save hight space if you only want to put these two types in the plate.
• It is recomended to print with the magnet holds facing down and use tree_support.
• The magnet holds are tight. If you find it hard to push the magnets in, try trimming the edge of the hold a little bit.
• Given the thickness, Plate.stl requires 2 magnets in each hole to have effective magnetivity. Plate_thin.stl needs only 1 in each hole.
The author marked this model as their own original creation.