3D Scanner Puck - No supports

No supports, no stickers, no problem.
15
101
0
411
updated August 17, 2024

Description

PDF

Simplified flat bottom 3d scan puck.

I also don't have the stickers, so I printed them. Fairly quick assembly process and still fits 17 pucks into DIY Dave's case.

The recess for the insert is .5mm deep and 10mm wide if people are still looking to use stickers. 

3D Scanning Target Case and Helper by 3DDIY | Download free STL model | Printables.com 

These are currently setup for 6x2mm magnets, but easily changed in the slicer.

Feedback is welcome, happy to assist with any adjustments.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Simplified flat bottom 3d scan puck.

I also don't have the stickers, so I printed them. Fairly quick assembly process and still fits 17 pucks into DIY Dave's case.

3D Scanning Target Case and Helper by 3DDIY | Download free STL model | Printables.com 

These are currently setup for 6x2mm magnets, but easily changed in the slicer.

Feedback is welcome, happy to assist with any adjustments.

License