Nespresso Latissima Coffee Drip Tray Remix - Larger Mugs/Cups

The Nespresso machine coffee cup area is way too small for a decent sized coffee mug/cup and I have had to resort to sliding the drip tray out of the way which results in milk and coffee spill spraying all over the wall etc...

I printed out Niklas's design but unfortunately still alot of my mugs and cups did not fit or needed to be angled to get them under the nozzle. Here is my remixed design which offers even more clearance (more than 2cm more than standard). The standard grill will work otherwise you can print Nikasio14's: https://www.thingiverse.com/thing:1399520

Credit should go to Niklas: https://www.thingiverse.com/nikasio14/about)

Print Settings

Printer Brand:

Wanhao

Printer:

Wanhao Duplicator i3 V2

No

Infill:

20%

Notes:

Suggested PETG or ABS needs to be used otherwise the heat might warp the object over time

For my printer I did not require any supports on the overhang, but that is up to you

Post-Printing

After printing, glue the two Pins into the bottom two holes these help guide the drip tray into the machine.

Made it loweThe Nespresso machine coffee cup area is way too small for a decent sized coffee mug/cup and I have had to resort to sliding the drip tray out of the way which results in milk and coffee spill spraying all over the wall etc...

I printed out Niklas's design but unfortunately still alot of my mugs and cups did not fit or needed to be angled to get them under the nozzle. Here is my remixed design which offers even more clearance (more than 2cm more than standard). The standard grill will work otherwise you can print Nikasio14's: https://www.thingiverse.com/thing:1399520