Elephant Fridge Magnet

Additional Parts

In addition to the 3d printed parts you'll also need up to 6 Neodymium (6x3mm) magnets

Print Settings

Instructions

Print the pieces in the orientation of the stl files.  

Everything but the Back is already oriented to print upside down for ease of assembly and grouped by color.

Lay the Eye Whites and Iris together

Place the face down onto the eyes.  (Note: There are grooves added to make it easier to align the parts together)

Glue the magnets into the body pieces (At least 2 but I found that 6 worked best with the magnets I had)

Rotate and glue the body and bow pieces into the back piece

Finally glue and place the nails