Mecha Girl HueForge

Project: MechaGirl.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160.35x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Bronze Transmission Distance: 1.7
PLA eSun Beige Transmission Distance: 4.5
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Charcoal Black
At layer #9 (0.8mm) swap to Bronze
At layer #10 (0.88mm) swap to Beige
At layer #16 (1.36mm) swap to White for the rest.