Imported from Thingiverse (2020)
Replacement knob for Magefesa classic pressure cookers, Star model.
UPDATE:
I printed this with PLA+ which has a heat distortion temperature of 52°C. Knob inner geometry deformed a bit after first use due to the high temp transmitted by the metal insert and screw. I therefore recommend using a material with better thermal resistance such as PETG or ABS.
V2 model updated with a bit tighter dimensions.
Notes:
Printed on its top side to reduce supports.
I recommend using a material with much better heat distortion temperature such as PETG or ABS as my PLA+ part deformed after first use.
Preferably use 4 walls or 1.6mm, and a good 3D infill such as Cubic or Octet. If possible less than 5mm of distance between infill walls.
Category: Kitchen & Dining
The author marked this model as their own original creation. Imported from Thingiverse.