Yoda Hueforge

Ein Hueforge von Yoda. 

Falls du es mit Olivgrün drucken möchtest schau einfach in meinem Profil :-) 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 250x250mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 3mm and the Actual Depth is 3mm

Filaments Used:
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite Pro White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Blue Gray
At layer #16 (1.36mm) swap to Grey
At layer #18 (1.52mm) swap to White for the rest.