Wahl portable weighing scales feet

The Wahl portable weighing scales are brilliant for taking out and about, as the fold up into a nice small shape and fit into a small bag. But they have 1 small problem…  The rubber feet from the weighing sensors fall off quite easily. Once you've lost 1 the scales are unusable.

I made this set of replacements to put on my scales and save them from the rubbish bin!

The hole in the feet are slightly oversize to aid fitment, so they need to be held on with a blob of superglue or other such adhesive.

They were printed using Creality Hyper PLA with the following parameters: -

Standard quality, layer height of 0.2mm, 300 mm/s speed, 0.6mm shell thickness, 15% infill density.

With these settings they should print correctly.