Paulimot PM190-V Way-Cover

You need to print:

1x LINKS_Spindelstock

1x LINKS_KlemmbügelAdaptor

1x RECHTS_Bettschlitten

2x UNI_Klemmbügel

The part for the slide is fixed with 2 m8 bolts (thread length doesnt really matter, i used ~12mm). The Part on the left side is glued on with 3M VHB Tape.

I ordered the Waycover from aliexpress

https://de.aliexpress.com/item/981500677.html

Product properties: 130x15x1500mm

Cut the cover to the desired length and screw the “UNI_Klemmbügel” to it using m2 screws and nuts.