Crystal Wyvern - Dragon Bookmark

_____________________________________________________________________________________________________________
☀ If you want to sell prints of this model, as well as all of my models - future and past, become an Authorized Merchant member of my Patreon for a commercial license! ☀
_______________________________________________________________________________________________________________

The Crystal Wyvern Bookmark captures the essence of a mystical, crystal-encrusted dragon. Its intricate design showcases sharp, crystalline scales that shimmer with hues of deep purple and icy blue, making it a strikingly beautiful addition to your reading experience. This bookmark is perfect for fantasy lovers, embodying the elegance and power of a legendary wyvern from the most enchanted realms. Let the Crystal Wyvern guard your place in your favorite book, adding a touch of magic to every page you turn.

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.4 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Jayo Black Transmission Distance: 0.3
PLA EryOne Matte NAVY BLUE Transmission Distance: 1.5
PLA Geetech Silk Purple Transmission Distance: 0.7
PLA KINGROON PINK Transmission Distance: 5.2
PLA+ Jayo Sky Blue Transmission Distance: 4.4
PLA KINGROON WHITE Transmission Distance: 6.9
Color Pallete:

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to NAVY BLUE
At layer #14 (1.2mm) swap to Silk Purple
At layer #16 (1.36mm) swap to PINK
At layer #18 (1.52mm) swap to Sky Blue
At layer #20 (1.68mm) swap to WHITE for the rest.