Stacked Donuts Pen/Pencil Holder

This is a model I made that is used as a pencil/pen holder.

Print settings:

• layer height 0.2
• infill 7% - 15% whatever you prefer
• supports ON

Recommended support settings I used for easy removal:

• line width for supports: 0.25mm
• type: tree
• style: organic
• top Z distance: 0.25mm
• bottom Z distance: 0.2mm
• base pattern spacing: 2.5mm
• base pattern: hollow
• top interface layers: 3
• bottom interface layers: 2
• top interface spacing: 0.7mm