Double Barrel Gatling Disk Shooter - Plunger Remix V3

The original remix used a piece of filament wire to stop the sleds from returning, however, I found that these broke off quickly with one or two shots. I then tried a remix for the stoppers, but it required a tap for the original sleds, and when trying to use it without a tap, it busted the original sleds.

This remix should hold up to the constant bashing of the sleds by using geometry to help the slamming from ripping the stopper off. I just use a single 3mm screw to hold the stopper onto the sled so that if the rubber band breaks you can replace it, but it is the geometry that is actually preventing the stopper from coming off. If you want, you can glue the stopper to the sled, but due to the original design, you won't be able to replace the rubber band if it breaks, This is why I chose to use a single screw.

I know they aren't the prettiest things, but I was trying to prevent the need to modify the original shooter body. I also was in a rush because my family is having a war with these little shooters. They are fun as all getout, and work surprisingly well.

NOTE: You will need to print all 4 STL files. They are mirrored and are the left and right side.
NOTE: You do not need to re-print the original disk shooter. These sleds work with the original, shooter and is a fairly small / quick print if you have already printed the original.

NOTE: The version number is relates to the version of the model in OnShape, and does not necessarily reflect that there are previous public releases of this model.

OnShape Link (For editing):
https://cad.onshape.com/documents/9a097f708597155df92d902e/w/f0111a3ee88578744fd20890/e/fe58e70dbbf760cb2b34a569?renderMode=0&uiState=66bc5915e3fceb7d0141259b
 

I extended the sleds and added some geometry to help hold a stopper on it. I printed the sleds and the stoppers out of Carbon Fiber Nylon (Because I am crazy), but it should work the same for PLA. This remix uses a single 3mm x 10mm screw. 

No tap required.