Kreg Track DeWalt Router Plate
The legs were in the path of the routed dado. The track groove was too large
34
192
0
1007
updated
August 14, 2024
Description
PDFSingle .stl file printed on AnkerMake M5C with PLA+. Bed 60 and nozzle 210
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
The two of the three stumps were in the path of the routed groove. I moved all 3 to make them further apart and out of the routed dado. The groove in the plate that rides on the track was too wide. I reduced the size from 18mm to 15.5mm.
