MOX Box modified parts to add a fan

Update 24/08/2023 : Add of an easiest way to plug a fan to your Mox with a unique part to print.

The Turris Mox is an modular, open source and secure router.

Even though this is a great router, it tends to get hot and reboot. To fix it, I used FreeCAD to import/modify 3 parts of the official MOX box and voilà. 

Now, I can add a fan into it to pull out the hot air outside of the enclosure.

Depending of the fan you've chosen, you may need 4x20 bolts + nuts.

Official printable parts are available on Thingiverse.

More information about how I get into this here.

Note : 

• The alignment of the holes is not perfect. I don't need nuts.
• I use PETG and not PLA but it's up to you.
• You may want to print the covers one by one.
• Don't mind the glitch on the side of the mox-bottom.

Add of a fan hole