Vertical box for Dig-Uno and Mean Well LRS-50

A more compact version of my other model, this one puts the Mean Well LRS-50 series PSU on a “card” inside the enclosure, and the Dig-Uno on the other side of the card. End result is a fairly compact little box, that can be used to power a few strings of LEDs.

Useful for a test bench, a portable unit, or really anywhere you need to have a complete package. If you want less, I'd recommend something like a Dig-2-go, as you can't really get internal power supplies much smaller than this.

You will need a few additional components:

• 4 M2x2x3.2 heat set inserts, to mount the Dig-Uno (You could probably make do with 2 diagonally
• 4 M2.5x2.5x3.5 heat set inserts, to attach the lid to the box
• 4 M2.5x6 screws, for the lid
• 2 M3x6 screws, to attach the LRS-50 to the bottom of the box