Dual-Z Alignment Tool longer version with 161mm Length and 55MM longer head end - Ender v2 Max Neo Edition

Dual Z alignment tool for maxneo
0
4
0
29
updated January 7, 2025

Description

PDF

Modified the STL to have a 55mm longer head end, so that it can fit the Ender v2 Max Neo printer to the frame.

It not as pretty as the original as I removed the writing, and when trying it out, I broke off the top tab of the original. So I removed that tab since it is not needed anyways. I made the base longer to accommodate for the longer head end and made the middle thicker as well as I noticed some flex in it due to the longer head. Hope it is useful to someone with a max neo printer. It may work for other ones, but that is the only printer I tried it on.

Category: 3D Printer Accessories

Tags



Model origin

The author remixed this model. Imported from Thingiverse.

Dual-Z Alignment Tool longer version with 161mm
by Paps3DPrints (thingiverse.com)
 

Differences of the remix compared to the original

Modified the STL to have a 55mm longer head end, so that it can fit the Ender v2 Max Neo printer to the frame.

It not as pretty as the original as I removed the writing, and when trying it out, I broke off the top tab of the original. So I removed that tab since it is not needed anyways. I made the base longer to accommodate for the longer head end and made the middle thicker as well as I noticed some flex in it due to the longer head.

License