FairCase4 extra snug without bumpers (cut holes)

A 3D printable TPU case for the Fairphone 4. I liked the design of the FairCase4 but the bumpers caused it to get caught in my pocket and the holes kept resulting in major bridging issues and resulted in extremely bad stringing on my MINI. No need for supports.

You will need to cut out the mics, USB-C, speaker, and buttons with an xacto knife or similar. For easier printing and better results with “Avoid crossing perimeters” one of the main changes is removing the holes.

• Increased wall size to 1.5mm for better printability
• Removed bumpers as they don't fit in my pocket
• Replaced holes with cuttable thin walls for easier printing and less stringing
• Reduced size of case by 1mm in horizontal dimensions for a more snug fit (therefore requiring TPU rather than just preferring it)