Skadis T-Clip Zip Tie Holder for small Zip Ties

Four different models to store your small zip ties on your Skadis board.

I'm using a shallower version of the Skadis T-Clip System by Line Arc Line.

To attach the zip tie holders to your Skadis board you need the “Skadis T-Clip System - Low Profile Flush Mount Clips” by tchoupshop.

V1: 5 compartments, diameter (inscribed circle) = 26.6 mm, inner heights: 50 mm, 60 mm, 70 mm, 80 mm (title photo)

V2: 4 compartments, diameter (inscribed circle) = 26.6 mm, inner heights: 50 mm, 62.5 mm, 75 mm, 75 mm

V3: 4 compartments, diameter (inscribed circle) = 26.6 mm, inner heights: 50 mm, 62.5 mm, 75 mm, 75 mm

V4: 4 compartments, diameter (inscribed circle) = 28.6 mm, inner heights: 50 mm, 62.5 mm, 75 mm, 75 mm

Tell me, if you want other sizes.

No supports needed if you print them in the same orientation as you would hang them to your board (don't lay them on the flat side that later faces the board).

Want a matching desk stand? Check out this file!