Manfrotto 055c Stativ Platte für Stativkopf, Manfrotto 055c tripod plate for tripod head,

Manfrotto 055c Stativ Platte für Stativkopf, Manfrotto 055c tripod plate for tripod head,
1
11
0
99
updated November 25, 2024

Description

PDF

Manfrotto 055c Stativ Platte für direkte befestigung des Stativkopfes. Diese Platte ersetzt das Originalteil R055,10. Der Stativkopf kann direkt auf die Platte geschraubt werden. Die Mittelsäule entfällt.
Benötigt wird eine Inbusschraube 3/8" x 1" Länge mit Beilagscheibe, sowie zur Befestigung am Stativ drei Inbusschrauben M5 x 20 mit Beilagscheiben und 3 Stück M6 x 10 Madenschrauben für die Verdrehsicherung.
Auf den Fotos (Prototyp) sind die M6 Gewinde für die Madenschrauben nicht zu sehen, im Modell sind sie aber vorhanden.
Wegen der Festigkeit mit mindestens 4 oder 5 Perimeter drucken.
Achtung! die originalen Inbusschrauben mit M5 x 14 sind zu kurz, diese tragen nur auf wenigen Gewindegängen.
……………………..
Manfrotto 055c tripod plate for direct attachment of the tripod head. This plate replaces the original part R055,10. The tripod head can be screwed directly onto the plate. The center column is omitted.
A 3/8" x 1" Allen screw with washer is required, as well as three M5 x 20 Allen screws with washers and 3 M6 x 10 grub screws for the anti-twist device for attaching to the tripod.
The M6 threads for the grub screws cannot be seen in the photos (prototype), but they are present in the model.
For strength, print with at least 4 or 5 perimeters.
Caution! The original M5 x 14 Allen screws are too short, they only support a few threads.

Tags



Model origin

The author marked this model as their own original creation.

License