GU10 tri-LED Spotlight (various versions)

These are the tri-LED versions of the spotlight. If you are looking for single-LED versions, you can find them here.

I specifically designed this light fixture for the Phillips Hue GU10 LED bulb. However, it should also be suitable for other GU10 LED bulbs, as long as their maximum diameter is no greater than 53 mm.

The light fixture consists of four parts: three spots and a base or mount. The spot is available in two versions, a shorter one and a longer one.
The only difference between the base and the mount is that the mount has additional screw holes for attaching it to the wall or ceiling.

Here's what you need for that:

• 3 x GU10 sockets
• 3 x Philips Hue GU10 Bulbs
• a few drops of super glue

The connection to the power cable is easiest with two Wago 221-415 connectors.

Printing information

All STL files are correctly aligned.

Layer height: 0.20
Perimeter: 2
Infill: 5%
Support: none

Glue the GU10 sockets into the designated recesses of the mount. Insert the bulbs and finally screw the spots onto the mount.

I am looking forward to your Makes! :-)

If you like this design, feel free to check out my others here.

Three LEDs instead of a single one.