16x2 LCD Housing

Housing for 16x2 LCDs with an I2C controller on the back. The front panel is universal and fits all versions of the back-part (45° or 90°). Select the correct hole diameter for your LCD screen (M2 or M3) and the display cutout (big or small).

For LCDs with the following measurements:

• M2 or M3 holes
• hole distance 75x31mm
• board dimensions 80x36mm
• display cutout dimensions 72x27mm (big) or 71x24mm (small) 

Requirements:

• 4pcs M2x20 or M3x20 screws for the front panel
• 2pcs M3 or M4 screws for mounting the back housing to your desired location