Toilet cleaner tablet tray remix

This is a tray to hold the toilet cleanser tablet so that the cleaning chemical agent does not soak into the main water tank where it can deteriorate rubber gaskets.  It is designed to only dispense the cleaning agent from the cleanser tablet by the flowing water from the fill water tube after each flush when the toilet bowl is refilled.

While this remix is entirely redesigned by me, the original idea belongs to BillyM on Thingiverse.

Here are the improvements:

• The mounting is now redesigned to fit varying sizes of overflow tubes
• The mounting now has gap and allows the overflow tube to function at the desired water limit. Original model fits snugly on top of the overflow tube, effectively adding a couple inches of water volume.
• The tray size is larger ((w)80mm x (L)122mm x (H)53mm) and has a curved in lip to direct sloshing water back into the tray
• The tray base has raised pegs to hold the cleanser tablet up for more surface area touching flowing water.  Additionally, resting water in the tray doesn't rapidly consume the tablet.
• There are 4 holes to with 2 sizes to fit the fill water tube for either side mounting.

Print right side up at an angle with the under tube. Support on the bottom from build plate only.  See photo of how my tree support looks like after printing.

Note: The drain hole is offset on purpose so that you can decide to bias the tray to either side by mirroring the model if necessary.

Remix to provide credit to BillyM for original idea.  This remix is entirely redesigned from the ground up with the following improvements:
 

• The mounting is now redesigned to fit varying sizes of overflow tubes
• The mounting now has gap and allows the overflow tube to function at the desired water limit. Original model fits snugly on top of the overflow tube, effectively adding a couple inches of water volume.
• The tray size is larger ((w)80mm x (L)122mm x (H)53mm) and has a curved in lip to direct sloshing water back into the tray
• The tray base has raised pegs to hold the cleanser tablet up for more surface area touching flowing water.  Additionally, resting water in the tray doesn't rapidly consume the tablet.
• There are 4 holes to with 2 sizes to fit the fill water tube for either side mounting.