Top fin pro power filter 30 gallon lid with drip protection

I had water on my floor, and I traced it to the poor lid design of the filter. The original lid loosely sits on top of the filter and the lip hangs over the edge of the filter box. Condensation and splashing builds up on the bottom of the lid and rolls to the edge. Depending on the angle of the filter, it can roll backward and drip down onto the floor.

This new lid inserts into the filter all the way around the filter housing, so condensation will all be guided back into the filter.

I made it for the 30 gallon version

Find the model in onshape here

Yes, my aquarium badly needs a clean, it's a 4 year Walstad. It's quite messy

Print Settings

Printer Brand:

Bambulabs

Printer:

0.16

Infill:

Notes: