Led drone gates / rings for microwhoops
Descrizione
PDFDo you need cheap simple led rings/gates for your races?
Vitamins
- PA Nylon Tube Pneumatic Air (10mm external diameter), for a big loop you need about 2 meters (so order 2 pieces of 10x7): https://ebay.us/KynD1p
EL strip with battery power supply (order 3 meters of the color you like, you need only 2 but you can cut it, or double loop it): https://s.click.aliexpress.com/e/\_dUkZGJn A perfect addition for your new rings, a PIDTimer:
https://www.thingiverse.com/thing:4228550Print Settings
Printer:
HICTOP Prusa i3
Rafts:
No
Yes
Resolution:
0.2
20
Notes:
The supports are not required but highly recommended. Reduce the angle of support to 40 degrees.
The hole in base_tighter.stl has a diameter of 10.5 mm that fits tight.Post-Printing
Base details
The base was based on the EACHINE led ring loops base. It has mounting points for screws or tent pegs
Configurations
This design also allows different configurations
Category: R/C VehiclesTags
Origine modello
L'autore ha contrassegnato questo modello come una sua creazione originale. Importato da Thingiverse.