PRUSA RESEACH Themed crocs charms

!!PRINT EVERYTHING UPSIDE DOWN!!

Hello and welcome to PRUSA THEMED CHARMS for your crocs

With thease chamars you can decorate your corcs so when people look at your pale legs they will know you spent your time inside making things. 

To use my print you will first have to select a top pin with its coresponding text, they also print a base pin to attach the top pin to, everything is pressfit but a bit of super glue wont hurt. 

It will take a bit of force to get everything in so I recomend using they plyers you got with your MK4 or simular tool. !!Note this might bend your top pin to be carefull!! If the plyers dont work then you can use a hammer to get them in. Please place the print face down and hammer is carefully from the back. !!Note this might break your print!! 

The easiest to print is the MK3,MK4, MK3S+ and the PRUSA models 

Medium is the XL,BIG XL and the printibles logo. 

The hardest is defenetly the PRUSA RESEARCH logo just because it has such fine details. scaling the print up 10% might help. I recomend printing this one by its self just because of the details. 

How to print

Everything face down, this is because most prints get a small elefant foot that at this scale matters. 

Nozzle 0.4 or smaller

Layerheight 0.2 or smaller 

infill 15%

pattern Gyroid 

Hey thanks for reading it all, I put in a lot of work to make this.