Samsung Galaxy Tab A9+ Wall-Mount Case - home assistant use

This wall-mount case is designed specifically for the Samsung Galaxy Tab A9+, providing a snug fit so your tablet stays secure. It’s perfect for creating a home assistant panel or an in-home media hub. There are two versions included:

1. Bottom Hole Version – Ideal when using a 90° USB charging cable routed through the bottom to a wall power adapter.

2. Back Hole Version – Allows you to route the cable directly through the back of the case if your wall outlet is behind the tablet.

There are two versions of this case: a single-piece design for larger printers and a two-piece design for small form factor printers. Both work identically, but the two-piece version requires a few more screws.

No matter which version you choose, the case is quick to print and easy to install.

Hardware needed:

4x M3 x 10mm screw DIN 912 (example)
1x USB-C cable 90 degree (example) 

For two piece version you need additional 7x screws.

Printing Recommendations

• Material: PLA or PETG (suitable for indoor use)

• Layer Height: 0.2 mm

• Perimeters: 2

• Supports: Not required

Enjoy a sleek, minimal design that keeps your Galaxy Tab A9+ within easy reach, whether you’re using it as a smart home controller or simply want a clean, wall-mounted look.

If you like my work please support me. :-) Buy me coffee at ko-fi.