Church of St.Michael in Dolné Zahorany Slovakia

Printed on Prusa MINI with nozzle 0,25 mm. The size of the mockup: 125x65x105mm. Material: PLA from vanilla yellow and burgundy red. Crosses from gold PLA. Walls printed without supports. Only the crosses needs to be printed with support. Roof 3 and 6 must be printed with a brim. I will post some g-codes of how I printed it with a Prusa MINI with a 0.25 nozzle. I also tried printing it with a 0.4 nozzle, but it didn't work out so well with Ender 3 v2.