Nozzle-cam (in body)

This remix adds a holder for a 7mm or 8mm USB endoscope as nozzle-cam (only tested with a 7mm since the 8mm has not arrived yet). The holder points the endoscope at the tip of the nozzle.

Make sure the endoscope has a short focal length since it will be pretty close to the nozzle.

It uses an m3 screw as a setscrew. I used a m3x6mm which recessed into the body. If the screw is too long it can interfere with the frame.

Warning: nozzle-cams can be very mesmerizing, I take no responsibility for hours wasted watching it XD.

Otherwise like the normal one.