A trowel to make levelling the soil in your microgreen trays. The trowel has two dowels the fit into holes located at the bottom. The dowels in the file can be sized to the height you require by simply changing the z height in the slicer. They are currently 2 cm in height (after inserting into the trowel). Use the trowel to grade your soil using the flat side, then flip around to use the scoop to extract the extra soil. You can tamp the soil with it and also use the scoop side to dig out pits for your seeds. Printed in pla is fine for indoor use, but if you are using it for outside, petg or asa recommended. Enjoy.
The author marked this model as their own original creation.