Crimson Wyvern - Dragon Bookmark

____________________________________________________________________________________________________________
☀ If you want to sell prints of this model, as well as all of my models - future and past, become an Authorized Merchant member of my Patreon for a commercial license! ☀
_______________________________________________________________________________________________________________

The Crimson Wyvern Bookmark captures the fierce spirit of a legendary wyvern. With its detailed wings wrapping around the page, this bookmark brings a touch of fantasy to your reading. The deep crimson scales give it a bold, fiery look, making it not just a bookmark, but a piece of mythical art. Perfect for anyone who loves diving into epic tales, this wyvern will guard your place in any book.

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.4 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Jayo Black Transmission Distance: 0.3

PLA EryOne Rose Red Transmission Distance: 2.4

PLA KINGROON Orange Transmission Distance: 4.5

PLA Jayo Matte White Transmission Distance: 4.6
 

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Rose Red
At layer #16 (1.36mm) swap to Orange
At layer #18 (1.52mm) swap to White for the rest.