Campfire Lamp

Overview

Lamp in shape of small firecamp. 

In this model I was inspired by a small fire named Calcifer from “Howl's Moving Castle”

To make lamp from this model I used small led like on photo

Which is available on Amazon https://amzn.to/3yvPM4T

Printing

I used 0,4 mm nozzle, 0.28 layer height (Draft Mode), PLA

To print in best quality you need coloring system like MMU, AMS or similar.

If you don't have such system I also added  each colored part solo so you can also print it using only option for switching filament on certain layer.

I created three folders with this model:

Fire full - if you want to print in monocolor or multicolor at once.

Fire with separated logs - you can print logs separately and only model of fire with colored eyes. It saves a lot of time.

Fire with each part separated - if you don't have MMU or AMS you can try to print it from this folder. However eyes are a little tricky. You have to print them with support, change filament on retina part and glue them to main body.

Have Fun