Bondtech lgx lite Smart effector mount

Fitting a direct drive extruder on the duet smart effector is difficult, this mount positions the lgx lite extruder in joust the right way so it does not interfere with the delta arms.

It works decently well, the bend in the small peace of ptfe tube makes printing flexible materials difficult as they tend to lock up in the bend.

I recommend printing this part with petg or preferably abs/asa.

Part is correctly oriented for printing, supports might be required depending on your cooling setup.

Requires 4 short m3 screws for mounting the extruder, 3 14mm m3 screws and nuts for mounting to the smart effector (you might need to cut some screws to the right length) as well as some ptfe tube