I designed and printed these for an aussie KoW player, Jattz, who wanted to do the effects for his Trident Realm army. Jattz's units are in the pictures. Each dam is about 0.25mm extra space around each edge from base sizes listed. Scale appropriately if you want to use these with lipped bases that are bigger than the unit footprint.
Liberally apply vaseline to edges and bottom of dam to both seal the edges of the base in the dam to prevent resin leaking underneath, and make for easier unit removal once the resin has cured.
Manually add a mouse-ear to each corner in the slicer if your printer has a tendency to curl the edges of large flat pieces (like mine sometimes does). They apparently also help for grip when removing the units from the dams.
Initial versions had very thin walls and were intended to be disposable. Current versions have thick walls and are intended to be reusable.
0.1mm layer height, 0.2mm first layer height
3 perimeters (vertical shell)
Horizontal shells - 8 layers top (0.8mm), 7 layers bottom (0.8mm)
20% gyroid infill
monotonic lines top and bottom fill pattern
The author marked this model as their own original creation.