PS-240 X-Frame Quadcopter - X-Quad

You can use it for 3D Acro flying or even as a FPV Racing Quad.

Supported arms: ZMR250 Thickness:
3mm
4mm
5mm

Possible setup:

Motor
http://www.banggood.com/DYS-SE2205-PRO-2300KV-2550KV-3-5S-Lipo-Race-Edition-Brushless-Motor-for-180-210-220-FPV-Racer-p-1059008.html?p=3R26141006882201412N

ESC
http://www.banggood.com/4X-FVT-LittleBee-30A-ESC-2-6S-BLHeli-Supports-OneShot125-For-RC-Multirotors-p-1031943.html?p=3R26141006882201412N

Flightcontroller
http://www.banggood.com/Upgrade-NAZE32-F3-Flight-Controller-Acro-6-DOF-Deluxe-10-DOF-for-Multirotor-Racing-p-1010232.html?p=3R26141006882201412N

PDB + OSD
http://www.banggood.com/MXK-Power-Distribution-Board-PDB-with-OSD-BEC-Output-5V-12V-3A-LC-Filter-for-CC3C-Naze32-F3-p-1031375.html?p=3R26141006882201412N

Propeller
http://www.banggood.com/2-Pairs-DALPROP-5040-T5040-3-Blade-PC-Propeller-CW-CCW-For-QAV250-ZMR250-240-RC-Multirotors-p-1056219.html?p=3R26141006882201412N

LiPo
http://www.banggood.com/Giant-Power-Dinogy-1300mAh-14\_8V-4S-65C-LiPo-Battery-For-RC-Airplane-Multicopters-p-1033106.html?p=3R26141006882201412N

Camera
http://www.banggood.com/Foxeer-HS1177-Sony-600TVL-CCD-2\_8MM-IR-Mini-FPV-Camera-5-17v-with-Bracket-p-1047125.html?p=3R26141006882201412N

Videotransmitter
http://www.banggood.com/Skyzone-Upgrade-TS5823S-40CH-5\_8G-200MW-AV-Transmitter-Module-RP-SMA-Female-p-1017491.html?p=3R26141006882201412N

LEDs
http://www.banggood.com/5Pcs-CJMCU-8-Bit-WS2812-5050-RGB-LED-Driver-Development-Board-p-961344.html?p=3R26141006882201412N

http://www.banggood.com/Matek-WS2812B-LED-Board-With-5V-Buzzer-For-Naze-32-Skyline-32-Flight-Controller-p-991715.html?p=3R26141006882201412N

Project by Phil
http://blog.seidel-philipp.de/ps-240-x-frame-betatest-gestartet/

Print Settings

Printer:

Mendel90

Rafts:

No

Supports:

Doesn't Matter

Notes:

For the top and bottom plate:

90-95% Infill

3 Perimeter

5 Bottom und Toplayer

layerheight 0,25mm

Printed it in PLA. Better use ABS or even PETG/HDGlass

How I Designed This

The Idea

a racer colleague (Gregor M) asked me to convert a dxf to a printable STL.
http://www.thingiverse.com/thing:1279722

I found the design fabulous and designed my own 3D printable, 3D flying quadcopter.

FPV View