MJX Hyper Go 10208 shock lift

A suspension lift mod for the MJX 10208 V1.1
3
60
1
438
updated August 10, 2024

Description

PDF

This mod dramatically increases the droop and suspension range by moving the mounting point up 8-11mm. There is no drive shaft binding.

 

ride height:
front  = 58 mm (11mm version)
rear = 55 mm (11mm version)

Instructions:

  1. take note of the camber angle
  2. remove lower shock mounting bolts
  3. drill missing 3mm holes in stone shield 
  4. install shock lift part + stone shield with 2 M3x16 screw
  5. reinstall shock with M3x16 screw and locknut
  6. adjust camber angle


BOM:
M3 locknut x4
M3x16 bolt x8 (+ original shock screws)

Print Settings:
Print individually 
TPU 95A
5-8 parameters
60% infill

Model origin

The author marked this model as their own original creation.

License