Bigtreetech HBB Button caps

Set of buttons for the bigtreetech HBB module. 

Printed the inserts with a semi transparent glow in the dark filament i had a sample of. The rest was printed in esun PLA+ dark blue. The motors off button isn't on my module (photo) because i designed that one later and need to print it for my own still. The inserts and caps fitted nice and snug on my module. When putting the insert in the caps please watch the orientation of the 2 because you can put them on in the wrong way and getting the inserts out is possible but not easy.

Printed with the top side down so the  texture of my peisheet is the top of the buttons. Simple print with no supports. The inserts i also printed with the top down so no supports needed. 0,4mm nozzle with 0,2mm layerheight.

I was looking for some nice buttons for my bigtreetech HBB module. I wanted to have the light shine through the buttons and found a nice version. I wanted to give it my own touch and used the blank button from Semen Rusakov and put my own icons in it. Printed the inserts with a semi transparent glow in the dark filament i had a sample of. The rest was printed in esun PLA+ dark blue. The motors off button isn't on my printer because i designed that one later and need to print it for my own still. The inserts and caps fitted nice and snug on my module. When eputting the insert in the caps please watch the orientation of the 2 because you can put them on in the wrong way and getting the inserts out is possible but not easy.