Dell Laptop and Dock - Under Desk Holder

Pictured here I'm using a Dell Latitude 5400 and a Dell WD19 USB-C dock.

Laptop slot is 225mm x 35mm. Screws for the dock are 88.15mm apart and fit M2.5 screws

The Model is 254mm wide so it fits the print area of the larger bambu printers. I printed in ABS and this orientation and it stuck to the PEI build plate nicely. If you print it in a more brittle material or on a smaller plate, consider flipping it on it's side so the layer lines go in the direction it needs strength.

https://makerworld.com/en/models/578902#profileId-499628