19" rack 8 Prusa MK3.x/MK4 build plates holder + drawer

19" rack 8 Prusa MK3.x/MK4 build plates holder + drawer with 1U in height.

Parts needed:

• 4x M3x18 screw
• 4 mounting screws fitting to you 19" rack

Print instructions:

• You will need a bigger printer like Prusa XL or e.g. Sovol SV08 to print this =)
• Print front parts standing
• Print the drawer on its bottom
• No supports needed
• Optional brim needed, depends on your bed adhesion 
• Textured sheet used
• PLA used

Happy printing =)