Stylish SD Card Storage

This storage box is fully print in place and stores up to 8 micro SD cards and 11 SD cards.

I've included two versions:

• One for multicolored printing (flat top)
• One for non-multicolor (embossed top)

I've also included my custom SD card art so you can print it or add it to another model if you'd like.

The SD and micro SD cards fit loosely, even with ABS, so no need to scale if using the following settings.

Layer height: 0.16mm or 0.20mm
Infill: 10% Grid
Supports: NONE
Print time: 2 hours (Bambu P1S)

If printing multicolor, set your initial layer speed and initial layer infill to 20mm/s

Happy printing!

• Removed the nub on the front
• Added a small handle to the top of the lid for easy opening
• Created custom artwork for the top