Travel Case with Individual Compartments

This case is perfect for traveling with small things that need to be sorted. It has 12 compartments with lids and 2 extra compartments without lids. The case is held closed by 4 magnets in each corner.

Each compartment is about 25mm wide, 35mm tall, and 15mm deep. The box itself is 120mm long, 80mm wide, and 40mm tall. 

By printing each compartment's lid separately, this allows for color coordinating the compartments and replacing the lids if they happen to break or don't fit properly. 

Feel free to put any decals or labels on the box and lids. I have included a few of my ideas in the pictures above.

Printing Instructions (Standard):
I used PLA with 0.2mm layer height, 10% infill, 3 walls, and no supports. Each part is printed as oriented and is print-in-place.

There are 2 different pieces for this build: the main case and the compartment lid. For a complete build, you need one main case and 6 compartment lids.

I used four 6x3mm magnets for the hinge. I can also upload variations with different magnet sizes if needed.

Find more of my organization prints in this collection!

Please comment with any questions or specific requests.

Happy Printing!