Tapo Camera Mount for Prusa XL with Enclosure

 Update 14.08.2024 

I made v2, where you can guide the power supply behind a rail.

I have created a camera mount so that I can place the Tapo C100 or C110 camera inside the original Prusa XL enclosure.

The camera mount can be installed on the front right and fixed with the M4x8r screw.

According to the manufacturer, the camera should be operated at temperatures of up to 40 degrees Celsius. Please ensure that the camera's power cable is not squeezed by the housing door.

Heat-resistant material (at least PETG) should be used for printing.

My printing parameters:
Material: PETG
Infill: 25%
Supports: on build plate only