Michael Jackson - 2 - Hueforge

I used Hueforge to create this  200 x 239 piece.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Prusament PLA Jet Black
Prusament PLA Gentleman's Grey
Prusament PLA Gravity Grey 
Filament PLA Blanc 

Swap Instructions:
Start with Black
At layer #7 (0.64 mm) swap to Gentleman's Grey
At layer #12 (1.04 mm) swap to Gravity Grey
At layer #16 (1.52mm) swap to Blanc  for the rest.