Mega-sized Brick Treasure Chest Building Set (5:1 scale)

This is a set of blocks that can be used to recreate the classic Castles themed Treasure Chest set from 1992 at 500% scale.

The stl files for the parts have all been organized into folders to make them easier to find. 

Please use the following table to assist with colors and quantities when printing the various model parts:

Once you have all the parts printed, the instructions to build this set can be found in the docs folder.

For those with Bambu printers, there are two Bambu project files located in the “Bambu 3mf Files” folder to simplify things even further.  These files contain the parts in an ideal orientation for printing.  Some of the parts would benefit from being cut in the slicer before printing.  Those modifications are included in these files as well. Note that you will need BambuStudio to open or work with these files.

The Crusader figure in this set was remixed from the Brick Megafigure published by Julia Ebert.  The only changes made to the original design are:

• A modified torso which includes a cavity to hold the torso sticker part provided with this design (the sticker part will need to be glued in place at this location).
• All parts were scaled down 50% to work with the rest of the model published here at a 5:1 scale from original parts
• The waist parts were modified slightly to make them easier to assemble.
• At 50% scale, the pins were difficult to work with (and really not needed) so these were removed from the print list (Glue was still used to attach the connectors to their respective parts)

The basic instructions for assembling the figure can be found in Julia's post.  This is a fantastic model that's easy to print and assemble.  Special thanks to Julia for sharing this work!

All the parts needed to build this set were taken from thal72's Printables profile and scaled to 500%. He has a massive library of brick parts available at this location.  If you wish to do any additional customization to this set, this is a fantastic resource to find additional parts.  Special thanks to him as well for sharing this work!

If you decide to print this, we'd love to see it.  Please post pics of your makes, and please consider liking this design by clicking the "like" link above.

Happy Building!!

•  Scaled all figure parts down by 50%. Modified Torso to allow for decorative inserts.  Modified waist parts to make it easier to assemble at this scale.

•  A subset of the models published by thall72 were organized and scaled up to work with the modified minifigure model.